Publications

Peer-reviewed output

Journal articles, conference contributions, and preprints from the SUSMAT group across carbon materials, energy storage, composites, and sustainability assessment.

Material Research

2026

Investigating the Shear and Thermal Behavior of Additively Manufactured Wood-PLA Biocomposites Including a Life Cycle Assessment

Md. Fazlay Rabbi; Rahul Sarker; Jack Becker; Asifur Rahman Badsha; Miraj Arefin; Israt Zahan; Md Arifuzzaman; Md Abdullah Al Bari; Md Golam Kibria

10.1080/15440478.2026.2640270

Solid electrolyte interphase engineering on hard carbon anodes for sodium-ion batteries: A review

Muetaz Mohammed; G. M. Ismail Hossain; Ankit Dev Singh; Mullaivananathan Vadivazhagan; Md Golam Kibria; Md Abdullah Al Bari
10.1016/j.jpowsour.2026.240627

Biomass-Derived Carbon Materials as Sustainable Platforms for Advanced Biomedical Applications

Shaikh Abdur Razzak; Shihab Uddin; Anwarul Hasan; Ahmad Nawaz; Muhammad Nurunnabi Siddiquee; Md Abdullah Al Bari; Mohammad Mozahar Hossain
10.1016/j.esi.2025.12.004

2025

Fabrication, characterization, and applications of hard carbons: A comprehensive review

Mawadda Adam; Tasneem Abdalla; Muetaz Mohammed; Md Abdullah Al Bari; Mohammad M. Hossain
10.1016/j.jpowsour.2025.237674

Experimental and numerical investigation of the compressive properties of nanoclay reinforced honeycomb structures

Taslim Ben Alam Protik; Md Shariful Islam; Md Arifuzzaman; Md Abdullah Al Bari
10.1016/j.nexres.2025.100554

Surface amorphized in situ RuO-NiFeOOH/Au islands for electrocatalytic oxygen evolution reaction

Karthick Kannimuthu; Pawan Kumar; Pooja Gakhad; Hadi Shaker Shiran; Xiyang Wang; Ali Shayesteh Zeraati; Sangeetha Kumaravel; Shariful Kibria Nabil; Rajangam Vinodh; Md Abdullah Al Bari; Maria Molina; George Shimizu; Yimin A. Wu; Pulickel M. Ajayan; Abhishek Kumar Singh; Soumyabrata Roy; Md Golam Kibria
10.1039/D5TA00958H

Carbon fiber from petroleum pitch: Current advances and potential applications

Ajay Sharma; Mustafa M. Amin; Md Abdullah Al Bari; Mohammad M. Hossain; Muhammad N. Siddiquee
10.1016/j.nexus.2024.100355

Analysis of mechanical properties of fly ash and boiler slag integrated geopolymer composites

Jasim Ahmed Chowdhury; Md Shahidul Islam; Md Ashraful Islam; Md Abdullah Al Bari; Arup Kumar Debnath
10.54113/j.sust.2025.000073

2024

Phase Change Materials in High Heat Storage Application: A Review

Robiul Islam Rubel; Md Washim Akram; Md Mahmodul Alam; Afsana Nusrat; Raju Ahammad; Md Abdullah Al Bari
10.1007/s13369-024-09519-z

Development of asphaltene-derived carbon fiber reinforced composites via additive manufacturing

Nasim Mahmud Akash; Shabab Saad; Md Abdullah Al Bari; Rahul Sarker; Chetan Gupta; Ghazale Asghari Sarabi; Arindam Phani; Farhan Zahin; Samia Tabassum; Kasimuthumaniyan Subramanian; Seonghwan Kim; Muhammad M. Rahman; Philip Egberts; Md Golam Kibria
10.1016/j.carbon.2024.119413

Effect of pre-hydrolysis and salt-impregnation on biochar production from jute stick

Samiul Alam; Md Abdullah Al Bari; Shadman Tahsin Nabil; Sk Tahmid Muhatashin Fuyad; Shabab Saad; Md Shahidul Islam; Md Golam Kibria
10.1007/s13399-023-03846-1

Transforming Waste into Wealth: Advanced Carbon-Based Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage

Ar Rafi Ferdous; Syed Shaheen Shah; Syed Niaz Ali Shah; Bashir Ahmed Johan; Md Abdullah Al Bari; Md Abdul Aziz
10.3390/molecules29092081

2023

Investigating the Shear and Thermal Behavior of Additively Numerical study on the design of flax/bamboo fiber reinforced hybrid composites under bending load Wood-PLA Biocomposites Including a Life Cycle Assessment

Sayed Mohammad Belal; Md Sayed Anwar; Md Shariful Islam; Md Arifuzzaman; Md Abdullah Al Bari
10.1016/j.hybadv.2023.100112

Bending analysis of glass fiber reinforced epoxy composites/copper-clad laminates for multi-layer printed circuit boards

Md Nazmul Islam; Md Sayed Anwar; Md Shariful Islam; Md Arifuzzaman; Md Abdullah Al Bari
10.1016/j.hybadv.2023.100090

Bifunctional Gas Diffusion Electrode Enables In Situ Separation and Conversion of CO₂ to Ethylene from Dilute Stream

Shariful Kibria Nabil; Soumyabrata Roy; Wala Ali Algozeeb; Tareq Al-Attas; Md Abdullah Al Bari; Ali Shayesteh Zeraati; Karthick Kannimuthu; Pedro Guerra Demingos; Adwitiya Rao; Thien N. Tran; Xiaowei Wu; Praveen Bollini; Haiqing Lin; Chandra Veer Singh; James M. Tour; Pulickel M. Ajayan; Md Golam Kibria
10.1002/adma.202300389

Permselective MOF-Based Gas Diffusion Electrode for Direct Conversion of CO₂ from Quasi Flue Gas

Tareq Al-Attas; Shariful Kibria Nabil; Ali Shayesteh Zeraati; Hadi Shaker Shiran; Tareq Alkayyali; M. Zargartalebi; Md Abdullah Al Bari; et al.†
10.1021/acsenergylett.2c02305

Techno-Economic & System Analysis Research

2026

Biogas and biomethane value chains: A critical review of anaerobic digestion, upgrading, utilization, and system integration

Muetaz Mohammed; Md Abdullah Al Bari; Yasser Nassar; Hala El-Khozondar
10.1016/j.biombioe.2026.109562

2025

Effect of material and spoke pattern on the strength and fatigue life of automotive wheels

Mostafizur Rahman; Md Shariful Islam; Md Arifuzzaman; Md Abdullah Al Bari
10.1063/5.0270101

Biomass-based hydrogen production towards renewable energy sources: an advance study

Faisal Alqarzaee; Md Abdullah Al Bari; Shaikh Abdur Razzak; Shihab Uddin
10.1007/s42247-024-00931-7

2024

Finite element analysis of ratcheting on beam under bending-bending loading conditions

Sk Tahmid Muhatashin Fuyad; Md Abdullah Al Bari; Md Makfidunnabi; H. M. Zulqar Nain; Mehmet Emin Özdemir; Murat Yaylacı
10.12989/sem.2024.89.1.023

2023

Economic and environmental assessment of asphaltene-derived carbon fiber production

Md Abdullah Al Bari; Shariful Kibria Nabil; Shabab Saad; Rahul Sarkar; S. Sabiha; Muhammad M. Rahman; Md Golam Kibria
10.1039/D3GC01573D

Negative stiffness honeycomb structure as automobile leaf spring: A numerical investigation

Fahim Faisal Arnob; Md Sayed Anwar; Md Shariful Islam; Md Arifuzzaman; Md Abdullah Al Bari
10.5267/j.esm.2023.5.005